Linkedin-in Youtube Envelope Search
Schubstangenförderer
Schubstangenförderer

Push-rod conveyor

Push-rod conveyors from KÖBO ECO>PROCESS GmbH

Push rod conveyors (PRC), also known as harpoon conveyors, are a proven conveyor system for transporting tufted chips and large quantities of cooling lubricant. Conveying distances of up to 200 meters can easily be covered with an PRC. The use of the push-rod conveyor is economical and cost-effective.

Structure

A variable cross-section of the push rod conveyor allows it to be adapted to the required chip and cooling lubricant capacity as required

The structure is roughly divided into the following steps:

  • Tub construction with counter-hook for holding the guided push rod (harpoon rod)
  • Push rod (harpoon rod) for conveying small and tufted shavings
  • Hydraulic unit for the hydraulic drive of the push rod
  • Floor or ceiling mounting possible

The alternating movement of the push rod transports the chips in the trough construction successively to the discharge.

  • A push rod in the conveyor trough is moved back and forth by a hydraulic cylinder
  • Carriers are attached to the positively driven push rod
  • the chip bundles are moved by the "carriers" in the conveying direction
  • Wall hooks hold the chips in position during the backward stroke of the push rod
  • Due to the height of the trough and a constant gradient, large quantities of cooling lubricant are removed in addition to the chips
  • Transportation of material over long distances
  • Transportation from:
  • Turning chips
  • short and long chips
  • spiral chips
  • Chips Tufts
  • High quantities of cooling lubricants (up to 10,000 l/min)
  • Separation of chips and cooling lubricant via slotted screen bottom
  • Long-distance transportation of chips (up to 200m)
  • Economical and affordable
  • Transport of large quantities of cooling lubricant due to variable width and height of the push rod conveyor
  • Reliable chip transport thanks to conveyor bar without additional flushing nozzles
  • Up to four push rod conveyors can be operated with just one hydraulic unit
  • Conveyed material: short / tufted chips
  • Width/usable width [mm]: 400 - 1000
  • Length [m]: max. 200 per PRC
  • Stroke length: approx. 1.5 m
  • Coolant transport up to > 10,000 l/min

Find out more about our services and references by calling +49 (0) 202 / 7 09 02 - 0

In urgent cases, you can also contact us via our KÖBO ECO>PROCESS service hotline: Tel. +49 (0) 202 / 7 09 02 - 199

Let's stay in touch

How can we reach you?

Which subject area are you interested in?
 

KÖBO ECO PROCESS GmbH
Am Raukamp 14
42111 Wuppertal

info@koebo-eco.com
www.koebo-eco.com

© 2023 All rights reserved

Linkedin Youtube