Linkedin-in Youtube Envelope Search
Scharnierbandförderer
Scharnierbandförderer
Scharnierbandförderer Aufbau
Icon - Filtertechnik von KÖBO ECO>PROCESS

Hinged belt conveyor

Hinged belt conveyors from KÖBO ECO>PROCESS GmbH

Hinged belt conveyors are ideal for transporting large quantities and for covering long distances. Hinged belt conveyors can be used as individual conveyors or as a complex conveyor system for fully automatic operation. The robust design enables use even under the most difficult conditions.

Tear plate

The tear plate is used to transport sheet metal scrap or punching waste. Their rough surface effectively prevents small slugs from sticking to the hinge plates due to oil residue.
As an alternative to the tear plate, dimpled or humped smooth sheet metal can also be used.

Click here
Trough plate

Thanks to its trough-shaped design, the trough plate is statically more stable than a conventional hinged plate. The option of adjusting the gap between the sheet metal and the tubular sleeve enables an optimum configuration.
Due to the strict requirements for the gap clearance, the troughed plate is also the preferred choice for transporting punching waste.

Click here
Plate made of smooth sheet metal

The hinged plate made of smooth sheet metal is used for transporting chips and piece goods such as forged parts.
This does not require an excessively small gap, which ensures more flexible handling.

Click here
Wire webbing

Wire belt conveyors are an optimal solution for transporting hot forged and die-cast parts.
They offer a wide range of applications both as stand-alone conveyors and as an integral part of a fully automatic sorting system.

Click here
Previous slide
Next slide
Structure
  • Standardized conveyor cross-sections with variable usable width
  • Special conveyor chains with rollers or flanged rollers
  • Horizontal or ascending design
  • Transfer of conveyed goods via chutes
  • Drive via shaft-mounted geared motor
  • Floor or ceiling mounting possible
  • Material is transported via hinged plates that are moved by two conveyor chains
  • Hinge plates made of individual metal plates, flexibly assembled using chain rods
  • Hinged plates connected via two external chain strands
  • The conveyor chains are driven by sprockets
  • Conveyor speed infinitely adjustable via frequency converter
  • As an individual conveyor or as a complex conveyor system
  • Transportation from:
  • Chips with or without cooling lubricant in Bünschel form or broken
  • Punching waste, such as sheet metal, slugs,.
  • cold and hot forged parts
  • Bulk goods
  • Garbage and other waste
  • Easy / simple and cost-saving maintenance
  • Support plates freely accessible after removing the cover, and therefore easy to maintain
  • Robust design / robust construction made of solid components
  • Additional reinforced versions are available for particularly heavy-duty applications
  • Conveyed material: short chips, long chips, fine sheet metal scrap and other bulk materials
  • Width/usable width [mm]: 150-1,100 (also wider on request)
  • Length [m]: max. 100 per sponsor
  • Incline angle 30°, 45°, 60°, or individually adjustable (also steeper)
  • Hinge plates have sheet thicknesses of 2 - 5 mm (individually also available in thicker sheet thicknesses)
  • Hinge plate spacings are generally: 63, 125 and 160 mm

Find out more about our services and references by calling +49 (0) 202 / 7 09 02 - 0

In urgent cases, you can also contact us via our KÖBO ECO>PROCESS service hotline: Tel. +49 (0) 202 / 7 09 02 - 199

Let's stay in touch

How can we reach you?

Which subject area are you interested in?
 

KÖBO ECO PROCESS GmbH
Am Raukamp 14
42111 Wuppertal

info@koebo-eco.com
www.koebo-eco.com

© 2023 All rights reserved

Linkedin Youtube