Linkedin-in Youtube Envelope Search
Klappbandfilter
Klappbandfilter
Icon - Filtertechnik von KÖBO ECO>PROCESS

Folding belt filter

Folding belt filter by KÖBO ECO>PROCESS for standard coolant filtration

Our folding belt filter (FBF) is a special version of a pressure belt filter. As a fully automatic cooling lubricant filter, our FBF is fed discontinuously with contaminated cooling lubricant via filter pumps. The coolant to be filtered is pressed through the filter medium with overpressure. The cooling lubricant is cleaned via a circulating filter medium or via fiber fleece as a consumable. After free discharge into a clean tank, the cleaned cooling lubricant is available again to supply production. The filtered dirt cake is blown dry in the KBF and then discharged for chip disposal.

Structure
  • Pressure-monitored, upper dirt chamber / pressure chamber for holding the cooling lubricant contaminated with dirt particles with pressure monitoring.
  • Horizontal filter belt support to separate the upper pressure chamber from the lower filtrate drain chamber
  • Lower filtrate drain chamber for collecting the cleaned cooling lubricant
  • Hinged / lifting upper chamber, pneumatically operated
  • The filtrate is drained from the side
  • Fully automatic
  • Continuous operation (with the exception of a short-term filter regeneration phase)
  • Filtration by pressure in the upper pressure chamber and flow of the cooling lubricant through the filter medium into the filtrate drain chamber
  • Initiation of filter regeneration by pressure measurement or time lapse
  • Dry blowing of the dirt cake before discharge
  • Fully automatic belt cleaning with brush or beater shaft and belt rinsing
  • Circumferential filter belt, optionally also with fleece operation
  • Cleaning of contaminated cooling lubricants during metalworking. Typical is the processing of various sludges from rough machining, especially steel or aluminum and grinding sludges (fine steel wool)
  • Machining processes with:
  • Cutting chips, fine and short
  • Sanding swarf and sanding sludge
  • Can also be used as a secondary filter/post-filter
  • Oil filtration
  • The system requires up to 80 % less space than a conventional flat belt filter, without compromising on filtration performance and even with a higher cleaning performance
  • Long service life and high throughput
  • low space requirement
  • Low maintenance effort
  • Low investment costs
  • Completely pre-assembled, short assembly and set-up times
  • Filter fineness* [µm]: 120 - 5
  • Filter surface size [m²]: 1.5
  • Throughput* [l/min]: 50 - 2,000

Find out more about our services and references by calling +49 (0) 202 / 7 09 02 - 0

In urgent cases, you can also contact us via our KÖBO ECO>PROCESS service hotline: Tel. +49 (0) 202 / 7 09 02 - 199

Let's stay in touch

How can we reach you?

Which subject area are you interested in?
 

KÖBO ECO PROCESS GmbH
Am Raukamp 14
42111 Wuppertal

info@koebo-eco.com
www.koebo-eco.com

© 2023 All rights reserved

Linkedin Youtube