Linkedin-in Youtube Envelope Search
Druckbandfilter KSS-Standardfiltration
Druckbandfilter Aufbau
Icon - Filtertechnik von KÖBO ECO>PROCESS

Pressure belt filter

Pressure belt filter from KÖBO ECO>PROCESS GmbH for standard coolant filtration

The pressure belt filter (PBF) is a fully automatic cooling lubricant filter that is fed discontinuously with contaminated cooling lubricant via filter pumps. The coolant to be filtered is pressed through the filter medium with overpressure. The cooling lubricant is cleaned via a circulating or reversing filter medium or via fiber fleece as a consumable. After free discharge into a clean tank, the cleaned cooling lubricant is available again to supply production. The filtered dirt cake is blown dry in the pressure belt filter and then discharged for chip disposal.

Structure
  • Pressure-monitored, upper dirt chamber / pressure chamber for holding the cooling lubricant contaminated with dirt particles with pressure monitoring.
  • Horizontal filter belt support to separate the upper pressure chamber from the lower filtrate drain chamber
  • Lower filtrate drain chamber for collecting the cleaned cooling lubricant
  • Front sealing flaps on both sides, pneumatically operated
  • Filtrate drain at the side or bottom
  • Completely pre-assembled, short assembly and set-up times
  • Fully automatic
  • Continuous operation (with the exception of a short-term filter regeneration phase)
  • Filtration by pressure in the upper pressure chamber and flow of the cooling lubricant through the filter medium into the filtrate drain chamber
  • Initiation of filter regeneration by pressure measurement or time lapse
  • Dry blowing of the dirt cake before discharge
  • Fully automatic belt cleaning with brush or beater shaft and belt rinsing
  • Filter belt circulating or reversing, alternatively with fleece operation
  • Cleaning of contaminated cooling lubricants during metalworking. Typical is the processing of various sludges from rough machining, especially steel, aluminum and grinding sludges (fine steel wool)
  • Machining processes with:
  • Cutting chips, fine and short
  • Sanding swarf and sanding sludge
  • Can also be used as a secondary filter/post-filter
  • Oil filtration
  • Optionally with additional filter aid
  • Filtration of washing water in metalworking
  • High throughput due to overpressure in the upper chamber
  • No backwashing during regeneration
  • Minimal set-up time due to completely pre-assembled delivery
  • Modular design and expansion of the overall system possible
  • Filter fineness [µm]: 120 - 30
  • Filter surface size [m²]: 3.0 - 6.0
  • Throughput [l/min]: 100 - 12,000

Find out more about our services and references by calling +49 (0) 202 / 7 09 02 - 0

In urgent cases, you can also contact us via our KÖBO ECO>PROCESS service hotline: Tel. +49 (0) 202 / 7 09 02 - 199

Let's stay in touch

How can we reach you?

Which subject area are you interested in?
 

KÖBO ECO PROCESS GmbH
Am Raukamp 14
42111 Wuppertal

info@koebo-eco.com
www.koebo-eco.com

© 2023 All rights reserved

Linkedin Youtube